Healthy Home and Mold Inspections

Even on brand-new homes, the smallest details can lead to the biggest headaches. During today’s inspection, I found several critical areas where Z-flashing and joint flashing were missing on composite siding. ​Why Does This Matter? ​Siding is designed to shed water, but flashing is what actually directs that water away from your home's structural framing. Without it: ​Wall Penetrations: Water can seep behind light fixtures, leading to electrical shorts or hidden rot. ​Horizon

We’re at a new construction today looking at a "designer" roof that’s a textbook case of questionable engineering. Here’s the breakdown: ​📍 The Convergence: Two roof planes meeting with nowhere for water to discharge. This isn’t a valley; it’s a bathtub. 📍 Lack of Ventilation: Without proper airflow, this roof is going to cook from the inside out, leading to premature shingle failure and potential moisture issues. 📍 Wrong Material: Shingles on a flat slope? That’s a leak w

Did you know that modern energy-efficient windows can actually act like a magnifying glass? 🔎 In this video, I’m showing you a concentrated "hot beam" reflecting off a window directly onto the exterior wall. ​While this home is brick and can handle the heat, this same reflection on vinyl siding can cause melting, warping, and permanent distortion. This often happens with high-efficiency, double-pane glass that has a slight "concave" flex, focusing the sun’s rays into a laser

New construction doesn't always mean "perfect." 🏠 ​Check out this thermal scan. To the naked eye, these walls look 100% ready for move-in. But my infrared camera tells a different story: massive gaps in the insulation. ❄️🔥 ​Without a thermography inspection, these homeowners would’ve been paying to heat the neighborhood all winter. This is why we don't just "look" at a house—we scan it. ​Don't just hope your new home is efficient. Know it is. 🛠️✨ https://www.tiktok.com/t/Z

I’m at a brand-new construction today, and the thermal imaging doesn't lie. We’re seeing a 20-30 degree differential between supply vents. In a new build, this usually points to unbalanced ductwork, restricted airflow, or even disconnected runs behind the drywall. ​Don't settle for "hot and cold spots" as just a quirk of the house. Get it inspected before you close! https://www.tiktok.com/t/ZThTtLoek/ https://youtube.com/shorts/DkDXDbza2fc?si=7gLhxeT2Hr4B6tsI ​ #HomeInspectio